Creality Space Pi X4 Filament Dryer
4.6Editor score
Dual independent heating chambers
Heats up to 85 degrees C
Illuminated window for monitoring
In this guide
Moisture is the silent enemy of high-quality 3D prints. When filament absorbs water from the air, it causes stringing, bubbling, and poor layer adhesion. A dedicated 3D Printer Filament Dryer Box solves this by actively removing moisture and keeping spools dry during storage and printing.
We evaluated the leading models based on heating speed, temperature control accuracy, storage capacity, and sealing quality. Our analysis covers options for hobbyists and professionals alike. Each product offers unique features like dual chambers, smart humidity monitoring, or large multi-spool support.
Below you will find detailed reviews of ten top-rated dryers. We highlight key specs, pros, cons, and ideal use cases for each. Note that product availability and pricing may change over time, so always verify details on the retailer site before purchasing your next unit.
Top 3 Picks for Best 3D Printer Filament Dryer Box
SUNLU S4 Filament Dryer Box
4.7Editor score
Holds four spools simultaneously
350W PTC heating system
Smart auto humidity control mode
SUNLU S1 Plus Filament Dryer
4.7Editor score
Ultra quiet under 10 dB
Simple LCD interface
Two roller internal design
Top 10 Best 3D Printer Filament Dryer Box in 2026 Compared
The following table provides a quick side-by-side overview of the top ten 3D Printer Filament Dryer Box models. Use this to compare key specifications like capacity, heating power, and temperature range at a glance.
ProductsSpecificationsEditor scorePrice
Editor's Choice
Comgrow 3D Printer Filament Dryer Box
Capacity 2kg spools
Temp range 40 to 50 degrees
LCD screen display
Silicone cable sheath outlet
4.4Editor score
Editor's Choice
Creality Filament Dryer Box 4 Spools
Capacity 4kg spools
Dual 200W chambers
Max 85 degrees C
Touch UI interface
4.6Editor score
Best Premium
Creality Space Pi SE Dryer
Capacity 1kg spool
360 degree circulation
Temp 45 to 65 degrees
Knob control interface
4.4Editor score
Creality Space PI Filament Dryer
Capacity 1kg spool
110W PTC heater
Temp 45 to 70 degrees
Power off memory
4.4Editor score
SUNLU Filament Dryer S1 Plus
Capacity 1kg spool
Built in fan
Temp 35 to 55 degrees
LCD humidity display
4.3Editor score
Polymaker Polydryer Filament Storage Box
Storage only unit
Desiccant support
Hygrometer included
1kg spool max
4.4Editor score
SUNLU 3KG Filament Dryer SP2
Capacity 3kg spool
250W PTC heater
70 degrees C max
Sliding latch seal
4.4Editor score
Sovol Filament Dryer SH02
Capacity 2kg spools
150W PTC heater
Temp 40 to 70 degrees
Safety auto cut
4.3Editor score
SUNLU S4 3D Printer Dryer
Capacity 4kg spools
350W PTC heater
Triple security protection
Auto humidity control
4.7Editor score
SUNLU S1 Plus Dryer
Capacity 1kg spool
Temp 35 to 55 degrees
Under 10 decibels
Large LCD screen
4.7Editor score
1. Comgrow Dryer Box – Reliable Entry Level Solution
Comgrow 3D Printer Filament Dryer Box
Holds 2kg spools
Temp 40 to 50C
LCD touch screen
Silicone cable outlet
The Comgrow 3D Printer Filament Dryer Box is an excellent entry point for those new to filament drying. With a solid 4.4 rating, it offers reliable performance for common materials like PLA and ABS. Its large storage volume allows you to keep two standard 1kg spools dry at once, making it practical for regular printing workflows.
Pros
- Large storage volume
- Affordable price
- Simple setup
- Compatible with many filaments
Cons
- Limited max temperature
- Basic controls
We may earn a commission when you buy through this link, at no additional cost to you.
Key strengths include its straightforward operation via a 2-inch LCD screen and touch buttons. The adjustable temperature range from 40 to 50 degrees Celsius is sufficient for most hobbyist filaments. The silicone cable sheath ensures smooth filament feeding without snags, while the sealed design keeps moisture out effectively during storage.
One trade-off is the lower maximum temperature compared to advanced models. If you work with high-performance materials requiring higher heat, this box might not suffice. However, for everyday printing needs, the trade-off is acceptable given its affordability and simplicity. It is a great starter unit.
This dryer box is ideal for hobbyists who need basic moisture protection without breaking the bank. Its compatibility with various diameters makes it versatile. Overall, the Comgrow box delivers consistent drying and storage. We recommend it for beginners or those printing primarily with standard filaments.
Spacious Interior Design
The internal dimensions allow for two full spools comfortably.
Effective Sealing
The snap button cover and silicone outlet maintain a good seal.
We may earn a commission when you buy through this link, at no additional cost to you.
2. Creality Space Pi X4 – High Capacity Performance
Creality Space Pi X4 Filament Dryer
Holds 4kg spools
Dual 200W heaters
Max 85 degrees C
Illuminated window
The Creality Space Pi X4 Filament Dryer stands out for its impressive capacity and power. With a 4.6 rating, it targets high-volume users needing to dry multiple spools at once. The dual independent heating chambers ensure even drying, removing moisture up to 30 percent faster than single chamber units.
Pros
- Holds four spools
- High temperature range
- Dual heating chambers
- Fast drying speed
Cons
- Higher price point
- Larger footprint
We may earn a commission when you buy through this link, at no additional cost to you.
Its standout feature is the ability to reach 85 degrees Celsius. This unlocks support for advanced filaments like ABS, PET, and Nylon. The illuminated window lets you monitor spools without breaking the seal, maintaining humidity control during pauses. The touch UI provides precise temperature customization for different material needs.
The main trade-off is the higher price and larger physical size. It requires more workspace than compact options. However, for professionals or labs printing frequently, the efficiency gains justify the cost. The ability to store and dry four spools simultaneously is a major productivity booster.
This dryer is best suited for advanced makers or small businesses running long print jobs. Its dual chambers and high heat capability make it versatile. We highly recommend it for those needing speed and capacity. It represents a premium choice in the market.
Dual Chamber Efficiency
Independent heating zones allow parallel drying of different materials.
Advanced Temperature Control
Up to 85 degrees C supports engineering grade filaments effectively.
We may earn a commission when you buy through this link, at no additional cost to you.
3. SUNLU S1 Plus – Silent Compact Dryer
SUNLU S1 Plus Filament Dryer
Holds 1kg spool
Temp 35 to 55C
Under 10 decibels
Large LCD screen
The SUNLU S1 Plus Filament Dryer is designed for quiet efficiency. With a high 4.7 rating, it impresses with its ultra-quiet design, operating below 10 decibels. This makes it perfect for home environments where noise is a concern. It effectively dries single spools without disrupting your daily activities.
Pros
- Ultra quiet operation
- Affordable cost
- Easy to use
- Clear display
Cons
- Smaller capacity
- Basic features
We may earn a commission when you buy through this link, at no additional cost to you.
Its user-friendly design includes a large LCD screen that clearly displays temperature and time. You can easily adjust settings to suit different filaments. The two internal rollers allow feeding while drying, ensuring smooth workflow. It handles various diameters including 1.75mm and 2.85mm comfortably.
While it only holds one spool at a time, this limits bulk drying. Also, the temperature range is capped at 55 degrees Celsius. Yet, for standard materials, these limits are often enough. The quiet operation and ease of use outweigh these minor constraints for most users.
This dryer is ideal for casual users who value a peaceful workspace. It simplifies drying with minimal fuss. We recommend it for home offices or shared spaces. Its combination of silence and simplicity makes it a top pick for budget-conscious buyers.
Whisper Quiet Mode
Operates under 10 decibels to avoid noise disturbance.
Simple Interface
Clear LCD and knobs make operation straightforward for everyone.
We may earn a commission when you buy through this link, at no additional cost to you.
4. Creality Space Pi SE – Fast Heating Value
Creality Space Pi SE Dryer
Holds 1kg spool
Heats to 65C in 15min
360 degree air flow
Knob control
The Creality Space Pi SE offers a fast heating solution for standard spools. With a 4.4 rating, it delivers quick results using high PTC efficiency. The built-in fan circulates hot air 360 degrees ensuring uniform heating across the entire spool within 15 minutes. This reduces waiting time significantly.
Pros
- Rapid heating
- Even air circulation
- Cost effective
- Good sealing
Cons
- Single spool capacity
- Basic display
We may earn a commission when you buy through this link, at no additional cost to you.
Its knob interface simplifies adjustments for temperature and time. The display shows real-time humidity and countdown timer. Thermal insulation cotton keeps the box warm and safe to touch. You can set different temperatures from 45 to 65 degrees Celsius based on filament needs.
The trade-off is single spool capacity and a less detailed display. You cannot monitor multiple spools at once. Also, advanced users might prefer a screen with more data. However, for fast prep and easy use, this unit balances price and performance well.
This dryer is best for hobbyists who print with various materials occasionally. It dries quickly and keeps spools dry between prints. We recommend it for efficient workflows. Its speed and simplicity make it a strong contender in the budget segment.
360 Air Circulation
Internal fan ensures even heating without hot spots.
Quick Heat Up
Reaches target temperature in 15 minutes for fast prep.
We may earn a commission when you buy through this link, at no additional cost to you.
5. Creality Space PI – Smart Features
Creality Space PI Filament Dryer
110W PTC heater
Temp 45 to 70C
48 hour timer
Power off memory
The Creality Space PI Filament Dryer combines smart features with efficiency. With a 4.4 rating, it offers one-key settings for 12 filament types. This makes switching between materials easy without manual tweaking. The 3.7-inch touch screen allows switching between Celsius and Fahrenheit seamlessly.
Pros
- Power outage memory
- Long timer
- One key presets
- Energy efficient
Cons
- Single spool
- Touchscreen sensitive
We may earn a commission when you buy through this link, at no additional cost to you.
It features a power-off memory function that remembers settings after a blackout. The 48 hour timer lets you run long cycles without constant supervision. The 110W PTC heater ensures durable and energy-saving performance. It handles composites like PLA-CF and PA-CF effectively.
The single spool capacity limits high-volume drying. Also, touch screens can be sensitive to accidental touches. However, the smart presets and memory features add significant convenience. For users needing versatility and convenience, this box delivers great value.
This dryer suits makers working with diverse filament types regularly. Its preset options save time. We recommend it for its intelligent design. The combination of memory and presets makes it stand out in its class.
Smart Presets
One key settings for 12 common filament types.
Power Loss Memory
Remembers settings after outages to save manual reset.
We may earn a commission when you buy through this link, at no additional cost to you.
6. SUNLU S1 Plus (Black) – Visual Display
SUNLU S1 Plus
Built in fan
Temp 35 to 55C
LCD display
210mm capacity
The SUNLU S1 Plus in Black focuses on visual monitoring of drying conditions. With a 4.3 rating, it features a 2-inch LCD screen showing temperature, time, and humidity accurately. This visual feedback helps users track progress precisely. The upgraded fan design speeds up moisture removal effectively.
Pros
- Visual monitoring
- Fan design
- Wide compatibility
- Affordable
Cons
- Basic design
- Fan noise
We may earn a commission when you buy through this link, at no additional cost to you.
You can adjust temperature and time using buttons. The range fits most common filaments. Its capacity handles standard spools comfortably. The design is practical for regular 3D printing needs. It helps solve stringing and clogging caused by wet filament.
The fan may add slight noise compared to silent models. Also, the controls are basic. However, the clear display makes it easy to manage drying cycles. For those who want to see conditions in real-time, this unit is a solid choice.
This dryer is ideal for users who rely on visual feedback. It simplifies monitoring without needing extra tools. We recommend it for its display clarity. It provides good value for home printing setups.
Clear LCD Interface
2-inch screen displays all key metrics visibly.
Active Fan System
Fan design expels excess moisture efficiently.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Polymaker Polydryer – Passive Protection
Polymaker Polydryer
Seal + desiccant
Hygrometer included
Storage only
1kg spool max
The Polymaker Polydryer Filament Storage Box is designed for passive protection. With a 4.4 rating, it combines a sealed enclosure with desiccant support to lock out moisture. It includes a hygrometer to track storage conditions without guesswork. This helps prevent stringing and uneven layer results between uses.
Pros
- Hygrometer included
- Sealed storage
- Compatible with many types
- Easy feeding
Cons
- No active heating
- Requires desiccant
We may earn a commission when you buy through this link, at no additional cost to you.
You can print without breaking the seal by feeding filament directly. It fits 1kg spools and supports common types like PETG and Nylon. The design keeps your workspace clean. It is a practical solution for longer-term storage needs.
Without active heating, it cannot dry wet filament quickly. You need to dry filaments before storing. Also, you must replace desiccants over time. However, for storage, it is excellent. The hygrometer adds significant value for maintaining quality.
This box is best for those needing reliable storage rather than drying. It complements other drying methods. We recommend it for extending filament shelf life. Its sealed design and monitoring tool are highly effective.
Hygrometer Monitoring
Built-in hygrometer lets you track humidity inside.
Sealed Feeding
Print without breaking the seal to maintain dryness.
We may earn a commission when you buy through this link, at no additional cost to you.
8. SUNLU SP2 – High Capacity Option
SUNLU 3KG SP2 Dryer
250W PTC heater
70 degrees C max
Roller spool holder
Separable base
The SUNLU SP2 Filament Dryer handles large spools efficiently. With a 4.4 rating, it uses a 250W PTC element to reach 70 degrees C in 15 minutes. The surround heating ensures even drying. It fits 3kg spools and standard sizes with its adjustable rollers.
Pros
- Holds 3kg spools
- Fast heating
- Sealed storage
- Detachable base
Cons
- Bulky size
- Price
We may earn a commission when you buy through this link, at no additional cost to you.
The detachable base lets you use it as a sealed storage box. Sliding latches ensure a tight seal. It includes a hygrometer and desiccant containers for humidity control. This all-in-one design reduces the need for separate storage boxes.
Its large size may not fit small desks. The price is higher than basic units. However, for large spools and fast drying, it performs well. The storage integration adds convenience for keeping prints safe.
This dryer suits users with large format needs. It combines drying and storage effectively. We recommend it for those using heavy spools. Its speed and capacity make it a practical choice.
Large Spool Support
Adjustable rollers fit 3kg spools easily.
Storage Integration
Detachable base functions as a sealed storage box.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Sovol SH02 – Dual Spool Value
Sovol SH02 Dryer
150W PTC heater
Dual spool capacity
Temp 40 to 70C
One key settings
The Sovol SH02 Filament Dryer offers dual spool drying. With a 4.3 rating, it heats to 70 degrees C in 25 minutes. The 150W heater uses a fan for 360 degree circulation. It includes one key settings for 9 filament types for easy setup.
Pros
- Dries 2 spools
- Safe cutoff
- Thick sealing
- Fast heating
Cons
- Fan alarm required
- Medium size
We may earn a commission when you buy through this link, at no additional cost to you.
Its safety features cut off heating if temperature exceeds 130 degrees C. The alarm prompts fan replacement if it stops. Sealing materials are thicker than previous models to keep moisture out. You can add desiccant bags for extra protection.
It may require monitoring for fan health. The medium size fits most desks well. However, the safety and drying performance are strong. For dual printing setups, this box is practical.
This dryer suits users running two printers at once. It saves space and improves workflow. We recommend it for its dual capacity and safety. It offers good value for the features.
Dual Spool Drying
Dries two 1kg spools simultaneously effectively.
Safety Auto Cut
Overheat protection cuts power automatically if needed.
We may earn a commission when you buy through this link, at no additional cost to you.
10. SUNLU S4 – High Speed Capacity
SUNLU S4
350W PTC heater
Holds 4kg spools
Triple security protection
Triple fan system
The SUNLU S4 3D Printer Filament Dryer Box handles four spools at once. With a 4.7 rating, it uses a 350W heater to reach 50 degrees C in 30 minutes. The triple fan system maintains even temperature balance. It offers auto humidity control for smart management.
Pros
- Holds 4 spools
- Fast heating
- Auto humidity
- Triple security
Cons
- Higher price
- Large size
We may earn a commission when you buy through this link, at no additional cost to you.
Triple security layers include PTC and software protection. It connects to four printers simultaneously for multi-color setups. The humidity control starts drying automatically at 50 percent and stops below 25 percent. This prevents excessive drying.
It is a premium unit with a large footprint. However, for multi-printer homes, its capacity is unmatched. The auto features reduce manual intervention. It ensures consistent dry conditions across all active spools.
This dryer suits multi-printer setups needing high throughput. We recommend it for its speed and control. It supports continuous printing without interruption. Its smart features make it a top choice.
Multi-Printer Support
Connects to four printers simultaneously for efficiency.
Auto Humidity Control
Auto starts and stops based on humidity targets.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best 3D Printer Filament Dryer Box
Selecting the right dryer requires balancing capacity, heating power, and control features. This section details key factors to consider for your specific printing needs.
Capacity
Consider how many spools you need to dry at once. Models range from single spool to four spools. Larger capacity units save time for busy users but occupy more space.
Choose capacity based on your print volume and available desk space.
Temperature Range
Different filaments require different drying temperatures. Standard materials like PLA need lower heat around 45 to 55 degrees Celsius. High-performance materials like ABS or Nylon may need up to 85 degrees Celsius.
Check the max temperature to ensure compatibility with your filament types.
Heating Speed
Faster heating reduces wait time before printing. Look for PTC heaters with high wattage or built-in fans for circulation. Quick cycles improve workflow efficiency.
Prioritize faster heating if you need to print frequently.
Sealing and Moisture Control
Effective sealing prevents moisture re-absorption. Features like silicone gaskets, sliding latches, or double locks are beneficial. Some models include hygrometers to monitor interior humidity.
Ensure the unit seals well to maintain dryness during storage.
Interface and Controls
User-friendly controls simplify settings. Options include knobs, touch screens, or one-key presets. Clear displays show temperature and time clearly.
Pick an interface that you find intuitive for adjustments.
Safety Features
Safety features like automatic cutoff or alarms prevent overheating. This is crucial for unattended drying. Look for certified temperature switches.
Safety features give peace of mind during long drying cycles.
Power Consumption
Efficient heaters save energy. PTC heaters are often more efficient than standard resistive ones. Check wattage to estimate running costs.
Consider energy efficiency if you run the dryer often.
Compatibility
Ensure the box fits standard spool sizes like 1.75mm or 2.85mm. Some models include rollers or holders for different weights. Compatibility with your printer's feed path matters too.
Verify physical dimensions to avoid fit issues.
How to Use and Care for Your 3D Printer Filament Dryer Box
To use, place your filament spool inside ensuring the thread feeds smoothly through the outlet. Adjust temperature and time based on material. Turn on the unit and wait for it to cycle.
For storage, keep the lid sealed when not in use. If you dry and store, check hygrometer readings if available. Replace desiccants periodically for best performance.
Clean the interior with a dry cloth to avoid dust. Check fan vents for blockage. Store in a dry place when not used to protect electronics.
Frequently Asked Questions
Why is drying filament necessary?
Filament absorbs moisture from air, causing stringing and weak layers. Drying restores print quality. It prevents bubbles and clogs inside the nozzle during printing.
How long does filament drying take?
Most spools dry in 4 to 8 hours depending on moisture levels. Highly damp filaments may need 12 to 24 hours. Always check material recommendations for exact times.
Can I use a dryer for any spool?
Yes, most dryers handle standard 1.75mm or 2.85mm spools. Check capacity limits like weight or diameter. Larger 3kg spools need specific boxes designed for them.
Do I need desiccant with a dryer?
Desiccant helps after drying for storage. It keeps humidity low in sealed boxes. Using it extends dryness between drying cycles effectively.
Is it safe to dry filament overnight?
Most modern dryers have safety features allowing overnight drying. Ensure temperature limits are set. Look for auto-off or timer functions for extra safety during unattended use.
How do I clean the dryer box?
Wipe the inside with a soft dry cloth. Keep vents clear of dust. Avoid liquid cleaners near electronics. Store in a dry place when not in use.
Final Thoughts on Choosing the Best 3D Printer Filament Dryer Box
Our review covered ten top models for drying and storing filament. The SUNLU S4 leads for capacity while the Space Pi X4 offers high heat. The S1 Plus stands out for quiet operation.
Prioritize temperature range and capacity based on your materials. Safety features and ease of use also matter for long-term satisfaction. Consider your workspace constraints too.
Prices and availability change. Always verify current deals before buying. A good dryer improves your print quality significantly. Invest in a unit that fits your needs perfectly.